posted by Admin on Jan 15
Alinco DJ-596
Specifications
General Frequency range E:TX&RX 144-145.995MHz 430-439.995MHz T: TX: 144-147.995MHz / 420-449.995MHz RX: 136-173.995MHz / 400-511.995MHz
Operating mode F2(1200bps)/8K50F3E/16k0F3E/F1E(Op: digital)
Channel steps 5, 10, 12.5, 15, 20, 25, 30KHz
Memory channel 100 channels + 2 quick recall (CALL)
Antenna Connector BNC (50ohm unbalanced)
Frequency stability +/- 2.5ppm TCXO
Power supply requirement 6.0 - 15.0V DC negative ground Current drain Approx. 1.2A TX VHF at 13.8V DC Approx. 1.4A TX UHF at 13.8V DC Approx. 75mA squelched Approx. 25mA battery save ON Usable temperature range -10 - +60c (14 - 140F)
Dimensions (w/o projection EBP-50N battery included) 56mm(W) x 124mm(H) x 36.5mm(D) 2.2”(W) x 4.88″(H) x 1.44″(D)
Weight Approx. 310g (11oz) with EBP-50N and EA98 whip antenna
CTCSS tone encoder/decoder 39 tones
Digital Coded Squelch encoder/decoder 104 codes
Transmitter Output power Approx. 5W at 13.8V DC V/UHF Approx. 4.5W VHF with 9.6V packs Approx. 4.0W UHF with 9.6V packs Approx. 2.5W V/UHF with EBP-56N Approx. 0.8W Low position V/UHF Modulation system Variable reactance frequency modulation Spurious emission Less than -60 dB Maximum frequency deviation +/- 5 KHz
Receiver Receive system Double-conversion superheterodyne Sensitivity (-12dB SINAD) Less than -15.0dBu Selectivity -6dB: 12KHz or more -60dB: 30KHz or less Audio output power More than 200mW(8ohm 10%THD)
